Showing 76–90 of 124 results

Sort by:

Muffle furnaces-250×250


  • Newly designed muffle furnace now has rapid heating and light weight construction
  • Most useful for ashing, igniting and heat treading of small parts in chemical and industrial field, college and
  • Special ceramic insulation makes furnace light weight
  • Exterior of heavy gauge S / G.I duly finished in epoxy powder coated shade.
  • Solid state electronic controller with digital indicator an CR/AL sensor
  • Uniform heat distribution through all 4 sides Kanthal A- I elements
  • A special solid state fuse for protection to elements in case of over heating
  • Maximum temperature :1100˚C working temperature:960˚C Operates on 230 volts C.

Oil Bath


  •  Most useful to use with magnetic stirrer.
  •  Single walled made of heavy gauge fully welded
  • Specially designed oil heaters – easy replaceable.
  •  Selection of controller – separate or attached.
  • Solid – state electronic DIGITAL temperature control – box & PT –
    100 as a sensor.
  • Temp. Range : 50˚C to 250˚C.
  •  Temp. Accuracy : ±1˚C.


These are 100% Oil Free, wherein not even a single drop of oil is used. These are a boon
for Vacuum & Pressure Applications, where even slightest Environmental
Contamination through oil mist is forbidden.
Chemical Analysers, Pollution Control Equipments, Gas Monitoring, Nitrogen
Generating Sets, Ozone Generators, Operating Clinical, Medical & Scientific Laboratory
Equipments, Suction of Desoldering Waste, Filtration, Dentistries & Spray Painting.

Model no. Max. Flow Ltr/Min Max. Vacuum (in
Max. Press (PSIG) Motor H.P.
SSE-VP/15-A 15 22” 25 1/20
SSE-VP/15-B 15 22” 35 1/20
SSE-VP/45-C 45 22” 40 1/8
SSE-VP/45-D 45 22” 60 1/4

Petri Dishes

  • The inner surface of these Dishes have a very good flatness
  • The accuracy of many biological assays depends on the flatness of the inside base of the Petri dish
  • Made of soda lime glass ensuring that the inner surface of the top and base are absolutely flat
  • These Dishes have high clarity and are free of bubbles
  • Ideal for use in routine work

Portable Autoclave

The body is constructed of SS 304 sheet deep dawn to Cylindrical shape. Sheet suitable of general laboratory use as well as for field sterilization of instrument sand dressings etc. Dome shaped SS lid is provided with seals the autoclave with Rubber Gasket. The working pressure is 1.1 to 1.2 Kg/cm2 (15-18 PSI). Unit fitted with Pressure Gauge,Spring loaded safety Valve Dead weight type safety Valve and Steam Release valve. The autoclave is hydraulically tested at twice the working pressure as per ISI requirement. It is fitted with ISI marked heater. Supplied complete with plug cord. Suitable to work on 220/230 volt, single phase, 50 Hz, AC supply

Reagent Bottle Glass Stopper

  • These narrow mouth reagent bottles, storage bottles have a sturdy gound neck
  • All Sizes have a durable matt-finished enameled area of marking
  • These bottles are mechanically strong and chemical resistant
  • The uniform amber color is highly durable and has high chemical resistance
  • Properties within the bottle remain unchanged, as the color is applied only on the external surface
  • Protects media from light radiation with a wave length between 300 nm and 500nm
  • Ideal for use with light sensitive media and for the long-term storage of substances
  • Supplied with solid glass stopper

Reagent Bottle Screw Cap

  • These bottles are mechanically strong and chemical resistant
  • Fabricated from Borosilicate 3.3 glass
  • The screw caps and pouring ring are made of PP
  • The bottles, screw caps and pouring rings can be sterilized and autoclaveable